PMBT3904QA - 40 V, 200 mA NPN switching transistor - 艾金森 Dratk PQMD12 - NPN/PNP resistor-equipped transistors; R1?=?47?kΩ,?R2?=?47?kΩ - 艾金森 Dratk PZU6.2B2 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PBSS5320D - 20 V low VCEsat PNP transistor - 艾金森 Dratk PZU5.1B1A - Single Zener diodes - 艾金森 Dratk PMBT3904VS - 40 V, 200 mA NPN/NPN switching transistor - 艾金森 Dratk PBSS5320T - 20 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PZU5.1B2A - Single Zener diodes - 艾金森 Dratk PQMD13 - NPN/PNP resistor-equipped transistors; R1?=?4.7?k?,?R2?=?47?k? - 艾金森 Dratk PZU6.2B3 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PMBT3906 - PNP switching transistor - 艾金森 Dratk PQMD16 - NPN/PNP resistor-equipped transistors; R1?=?22?k?,?R2?=?47?k? - 艾金森 Dratk PZU6.8B - Single Zener diodes in a SOD323F package - 艾金森 Dratk PZU5.1B2L - Single Zener diodes - 艾金森 Dratk PBSS5320X - 20 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PMBT3906M - 40 V, 200 mA PNP switching transistor - 艾金森 Dratk PZU6.8B1 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PQMH2 - NPN/NPN resistor-equipped transistors; R1?=?47?k?,?R2?=?47?k? - 艾金森 Dratk PBSS5330PA - 30 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PZU5.1B3A - Single Zener diodes - 艾金森 Dratk PMBT3906MB - 40 V, 200 mA PNP switching transistor - 艾金森 Dratk PZU6.8B2 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PBSS5330PAS - 30 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PQMH9 - NPN/NPN resistor-equipped transistors; R1?=?10?k?,?R2?=?47?k? - 艾金森 Dratk PZU5.1BA - Single Zener diodes - 艾金森 Dratk PMBT3906VS - 40 V, 200 mA PNP/PNP switching transistor - 艾金森 Dratk PZU6.8B3 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PBSS5330X - 30 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PQMH10 - NPN/NPN resistor-equipped transistors; R1?=?2.2?k?,?R2?=?47?k? - 艾金森 Dratk PZU7.5B - Single Zener diodes in a SOD323F package - 艾金森 Dratk PZU5.1BL - Single Zener diodes - 艾金森 Dratk PMBT3946VPN - 40 V, 200 mA NPN/PNP switching transistor - 艾金森 Dratk PBSS5350D - 50 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PZU5.6B1A - Single Zener diodes - 艾金森 Dratk PQMH11 - NPN/NPN resistor-equipped transistors; R1?=?10?k?,?R2?=?10?k? - 艾金森 Dratk PZU7.5B1 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PMBT4401 - NPN switching transistor - 艾金森 Dratk PZU5.6B2A - Single Zener diodes - 艾金森 Dratk PBSS5350T - 50 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PQMH13 - NPN/NPN resistor-equipped transistors; R1?=?4.7?k?,?R2?=?47?k? - 艾金森 Dratk PZU7.5B2 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PMBT4401YS - 40 V, 600 mA, double NPN switching transistor - 艾金森 Dratk PBSS5350TH - 50 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PRMB11 - 50 V, 100 mA PNP/PNP Resistor-Equipped double Transistors (RET) - 艾金森 Dratk PZU5.6B2L - Single Zener diodes - 艾金森 Dratk PZU7.5B3 - Single Zener diodes in a SOD323F package - 艾金森 Dratk PMBT4403 - 40 V, 600 mA, PNP switching transistor - 艾金森 Dratk PZU8.2B - Single Zener diodes in a SOD323F package - 艾金森 Dratk PBSS5350X - 50 V, 3 A PNP low VCEsat (BISS) transistor - 艾金森 Dratk PZU5.6B3A - Single Zener diodes - 艾金森 Dratk
HIP4086A
80V, 500mA, 3-Phase MOSFET Driver

热度 104

The HIP4086 and HIP4086A (referred to as the HIP4086/A) are 3-phase N-channel MOSFET drivers. Both parts are specifically targeted for PWM motor control. These drivers have flexible input protocol for driving every possible switch combination. The user can even override the shoot-through protection for switched reluctance applications.

The HIP4086/A have a wide range of programmable dead times (0.5μs to 4.5μs) which makes them very suitable for the low frequencies (up to 100kHz) typically used for motor drives.

The only difference between the HIP4086 and the HIP4086A is that the HIP4086A has the built-in charge pumps disabled. This is useful in applications that require very quiet EMI performance (the charge pumps operate at 10MHz). The advantage of the HIP4086 is that the built-in charge pumps allow indefinitely long on times for the high-side drivers.

To insure that the high-side driver boot capacitors are fully charged prior to turning on, a programmable bootstrap refresh pulse is activated when VDD is first applied. When active, the refresh pulse turns on all three of the low-side bridge FETs while holding off the three high-side bridge FETs to charge the high-side boot capacitors. After the refresh pulse clears, normal operation begins.

Another useful feature of the HIP4086/A is the programmable undervoltage set point. The set point range varies from 6.6V to 8.5V.

  • Independently drives 6 N-channel MOSFETs in 3-phase bridge configuration
  • Bootstrap supply maximum voltage up to 95VDC with bias supply from 7V to 15V
  • 1.25A peak turn-off current
  • User programmable dead time (0.5μs to 4.5μs)
  • Bootstrap and optional charge pump maintain the high-side driver bias voltage.
  • Programmable bootstrap refresh time
  • Drives 1000pF load with typical rise time of 20ns and fall time of 10ns
  • Programmable undervoltage set point
    • Brushless Motors (BLDC)
    • 3-phase AC motors
    • Switched reluctance motor drives
    • Battery powered vehicles
    • Battery powered tools
 
Alternatives
Parameters HIP4086A HIP4086 HIP4082 ISL6700
Max Bootstrap Supply Voltage95 V 95 V 95 V 95 V
VBIAS (max)15 V 15 V 15 V 15 V
Peak Pull-up Current0.5 A 0.5 A 1.4 A 1.4 A
Peak Pull-down Current1.1 A 1.1 A 1.3 A 1.3 A
Turn-On Prop Delay65 ns 65 ns 75 ns 70 ns
Turn-Off Prop Delay75 ns 75 ns 55 ns 60 ns
Rise Time20 ns 20 ns 9 ns 5 ns
Fall Time10 ns 10 ns 9 ns 5 ns
InputLogicLevel3.3V/TTL 3.3V/TTL 3.3V/TTL 3.3V/TTL
ChargePumpNo Yes No No
Qualification LevelStandard Standard Standard Standard

Renesas 官网地址

PMIC
门户

新闻

创意思路

海外资讯